Kern-sohn ALJ 310-4A User Manual download pdf (Page 54)

ALJ/ALS/PLJ/PLS-BA-e-1338

10.1 Parts counting

Before the balance can count parts, it must know the average part weight (i.e.

reference). Proceed by putting on a certain number of the parts to be counted. The

balance determines the total weight and divides it by the number of parts, the so-

called reference quantity. Counting is then carried out on the basis of the calculated

average piece weight.

As a rule:

The higher the reference quantity the higher the counting exactness.

 In weighing mode press MENU button. The first menu item „count“ is displayed.

 Acknowledge using PRINT button, the current reference quantity is displayed.

 Using the arrow buttons   select reference quantity (10, 25, 50, 100 or

manual = numerical input of the reference weight, see chap. 10.1.3).

Scroll forward using MENU button

Scroll backward using CAL button

 If using a weighing container, put this before pressing the PRINT button. The

taring process is automatically started. „0-t“ is displayed.

 Confirm selected reference number of items by pressing the PRINT button.

 Place as many pieces to add-up as required by the set reference piece number.

 Acknowledge using PRINT button and wait for standstill control.

After successful reference determination the current quantity is displayed.

 Remove reference weight. The balance is now in parts counting mode counting

all units on the weighing plate.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 77 78

No comments

Kern-sohn ALJ 310-4A User Manual Page 54