Kern-sohn BBN 3T-3M User Manual download pdf (Page 14)

9.2 Check and adjustment of the corner load

Check of the corner load:

• Place the test weights in the centre of the load plate

and tare.

• The balance displays -0-.

• Place the test weights successively on all four

corners.

• Now the deviations are displayed with sign, write

down the values. If there are deviations out of the

tolerances (see chap. 9.1), an adjustment will be

necessary.

Adjustment of corner load:

Preparation:

• For a better control of the modifications which occur

during adjustment, select in the configuration menu

the highest readability for control purposes.

• Open connection box

Adjustment rule:

The corner (weighing cell) with the biggest negative

deviation must be set to zero. Do not re-

adjust this corner

even after several adjustment sequences.

Adjustment on the analogue print

KFP V40-IA-e-1412 14

1 2 ... 9 10 11 12 13 14 15 16

No comments

Kern-sohn BBN 3T-3M User Manual Page 14