Kern-sohn EOB F User Manual download pdf (Page 22)

EOB_F-BA-e-1310

Setting channels

(display unit)

(platform)

The balance has the possibility to set different channels. This

is particularly necessary if several platforms are inserted next

to each other. In this case failures may appear if not different

channels have been set. It is possible to select between 3

channels.

Setting channels on the display unit:

Set rocker switch next to the platform to „1“.

Switch-on display unit using ON/OFF button and wait for zero

display. The data receiving symbol flashes

The triangle displays the selected channel.

If the data receiving symbol does not appear, use the CH1-3

button to change to the correct channel

Setting the channels on the platform:

Switch-off platform (rocker switch on the side to „0“)

Actuate the dip switch at the lower side of the platform. (pin 4

is not used).

Platform 314,5 x 304, 5 mm:

Platform 550 x 550 mm:

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

No comments

Kern-sohn EOB F User Manual Page 22