Kern-sohn MLS 50-3C User Manual download pdf (Page 59)

MLS_C-BA-e-1330 59

Press the arrow keys ( ), to select “Profile“

Press  -button

Press the -key anew; the current menu item blinks

Press the arrow keys ( ), to select among the

heating programs below plus the related parameters

• Standard

• Step-by-step

It is possible to increase the temperature step-by-

step. The number and size of steps can be selected

at will, see chpt. 11.8.

• Soft

Temperature is slowly increased. It is possible to

adjust the lengths of the ramp, see chpt. 11.8

• Fast

Temperature is increased very quickly and for a

short while exceeds the set temperature value.

Afterwards the temperature is lowered to processing

temperature and kept there until the end of the

process, see chpt. 11.8

Confirm by pressing the PRINT key



The heating program is selected first, followed by the

related parameters. (temperature/drying time)

Press the  -button; the cursor (►) marks the

adjustable parameter

Press the - button anew and the current setting will

flash

Press the arrow keys ( ), to carry out the desired

setting

Confirm entry by pressing the PRINT-key and enter

additional parameters as follows.

For the selection of "standard"

or "fast" enter temperature

afterwards

For the selection of “soft“ enter

temperature and drying time

afterwards

For the selection of “step-by-

step” enter temperature and

drying time for step “1” and “2”

afterwards

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 82 83

No comments

Kern-sohn MLS 50-3C User Manual Page 59