Kern-sohn MLS 50-3C User Manual download pdf (Page 75)

MLS_C-BA-e-1330 75

11.8 Description of heating profiles

4 heating profiles are available, as follows:

• Standard

• Fast

• Soft

• Step-by-step drying

Standard drying

Standard drying is the most frequently used drying

process. This type of heating method is suitable for

the majority of substances.

Soft drying

The soft heating method is suitable for substances

that are unable to tolerate a sudden rise in

temperature applied by radiators. There are also

those substances that form a film when warmed up

quickly. This film will afterwards affect the

evaporation of the enclosed moisture. For such

substances, the soft mode of warming is equally

suitable.

Fast drying

The fast heating profile is suitable for samples with

a moisture content of 5% to15%. The temperature is

increased very quickly and, for a short while, will

exceed the set drying temperature. After that the

temperature will be adjusted down to the set value.

The sample must contain enough moisture.

Step-by-step drying

Step-by-step drying is suitable for substances that

display special behaviour during warming. The

individual steps are freely selectable regards

duration and temperature rising step. Samples

should have a moisture content of at least 15%.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 81 82 83

No comments

Kern-sohn MLS 50-3C User Manual Page 75