Kern-sohn KFE-TM User Manual download pdf (Page 19)

KFE-TM-BA_IA-e-1313 19

7.5 Weighing with taring

 Deposit weighing vessel. After successful stop check press the button. Zero

display and indicator NET appear.

The weight of the container is now internally saved.

 Weigh the material, the net weight will be indicated.

 After removing the weighing container, the weight of the weighing container

appears as negative display.

 The taring process can be repeated any number of times, e.g. when adding

several components for a mixture (adding). The limit is reached when the whole

weighing range is exhausted.

 To change between gross weight and net weight, press .

 To delete the tare value, remove load from weighing plate and press .

7.6 Weighing with tolerance range

You can set an upper or lower limit when weighing with tolerance range and thus

ensure that the weighed load remains exactly within the set limits.

During tolerance controls such as dispensing, portioning or sorting the unit will

indicate whether a value exceeds or falls short of limits with an optical [LO, OK, HI]

as well as an audio signal according to the setting in the menu block “F4

oFF_BEEP“; see chapter 8.2.

Selectable mode

Description

bp 1

Acoustic signal switched off, only optical signal active

[LO], [OK] or [HI]

bp 2

If load is within tolerance range, [ok] will be displayed

and audio signal will be sounded.

bp 3

If the load is beyond the tolerance range [ok] will be

shown and the audio signal will sound.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 57 58

No comments

Kern-sohn KFE-TM User Manual Page 19