Kern-sohn KFE-TM User Manual download pdf (Page 9)

KFE-TM-BA_IA-e-1313 9

3.4 Monitoring of Test Resources

In the framework of quality assurance the measuring-related properties of the display

unit and, if applicable, the testing weight, must be checked regularly. The responsible

user must define a suitable interval as well as type and scope of this test. Information

is available on KERN’s home page (www.kern-sohn.com with regard to the

monitoring of display units’ test substances and the test weights required for this. In

KERN’s accredited DKD calibration laboratory test weights and display units may be

calibrated (return to the national standard) fast and at moderate cost.

4 Basic Safety Precautions

4.1 Pay attention to the instructions in the Operation Manual

Carefully read this operation manual before setup and commissioning, even if you

are already familiar with KERN balances.

4.2 Personnel training

The appliance may only be operated and maintained by trained personnel.

5 Transport and storage

5.1 Testing upon acceptance

When receiving the appliance, please check packaging immediately, and the

appliance itself when unpacking for possible visible damage.

5.2 Packaging / return transport

 Keep all parts of the original packaging for a possibly

required return.

 Only use original packaging for returning.

 Prior to dispatch disconnect all cables and remove

loose/mobile parts.

 Reattach possibly supplied transport securing devices.

 Secure all parts such as the glass wind screen, the

weighing platform, power unit etc. against shifting and

damage.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 57 58

No comments

Kern-sohn KFE-TM User Manual Page 9